Tilt and Slide Patio Door Repairs
A functional tilt and slide patio door brings light, fresh air and a smooth transition between indoors and out. Modern aluminium doors offer durability and strength and thermal integrity, and a variety of glass options that can be adapted to an array of styles.
Dirty tracks and rollers are the most common causes of problems with sliding doors. Cleaning and lubricating regularly the moving parts will keep your sliding door in good working order.
Track and Roller Replacement
Tracks and rollers are principal components of sliding door functionality. They are situated at the bottom of a door made of aluminum and are seated on a raised track which guides them when they open and close. Over time, dirt accumulation in the tracks could cause them to become blocked. This could cause the rollers to become damaged. Keeping your patio door clean and well-lubricated can prevent these issues.
Unless the track is badly bent, it's possible to fix the track and rollers without completely removal of the door. Get a helper and then tilt the panel towards you to lift it off the bottom track (Photo 3). It could take some effort to lift the panel since they are heavy. After the panel has been removed, lay it flat on sawhorses and examine the rollers. Replace them if damaged by purchasing a new set. You can adjust the rollers' height by turning the adjustment screws which are usually located in slots along the edge of the panel.
If the rollers are in good working order they might need to be cleaned or lubricated. Take the rollers off with a screwdriver and wash them with denatured ethanol. This will remove any dirt and grime that has accumulated that might be creating resistance. After carefully positioning each roller in its slot completely retract it using the adjustment screw. Lastly, lubricate the rollers with a silicone spray. This type of lubricant won't retain dirt like petroleum-based products, and will help your door move effortlessly.
After cleaning the rollers and installing them, you can install the door and check it to ensure that the track is in alignment with the rollers and the doors are sliding smoothly. Contact a local dealer if you require assistance. Keep your doors clean and well lubricated to prolong their life and minimize the need for repair. We recommend a lubricant made of silicone because it doesn't draw dirt the way that WD-40 does. It is recommended to lubricate your rollers and tracks at least once every month.
Replace insect screens
Sliding patio doors are fantastic for maximising the floor space, allowing airflow while allowing panoramic views. They can also pose a problem if the mechanism is not functioning properly or has stopped moving altogether. The majority of sliding screen door issues can be fixed easily. Dirty rollers from debris in the track or a wrinkled screen are the most common causes, but you can usually fix them by following these easy steps.
If your screen is looking sagging, or wrinkled, place a 1x4 under each of the frames to create a slight bend in the middle. This will help to make the screen more rigid and straighten it.
Be sure to purchase a replacement screen that is just a few inches larger than the frame openings in both directions. You'll be able to cut any excess. Also, make sure to press the one end of the rubber spline into the channel with the spline rolling tool. Once you've completed this, it is time to insert the remainder of your spline.
Adjusting the Panel
The tilt and slide mechanism lets you open the patio doors wider to allow for more ventilation, while keeping your pets, children, and other household members safe. The doors require more force to open than you would think. In time, this can lead to more friction and crooked tracks, or misalignments, which could cause the door to not work. A quick detection and minor adjustments can often solve these issues, thereby reducing the cost of replacing hardware.
The first step in adjust a tilt-and slide patio door is removing the panels. Set it on a flat surface. After the panels have been removed using a screwdriver, remove the plastic holes caps from each of the adjustment rollers. Once the plastic hole caps are removed, you can make use of a long-shafted screwdriver to coax the adjuster out of its channel. Once the adjuster is removed from its channel, place it on a flat surface, then clean it with alcohol rubbing or a stronger variant such as denatured alcohol. This will get rid of any dirt that has caused the roller to squeeze and allow it to easily retract back into its channel following the process.
When reinstalling a movable panel align it with the frame and use the drill to drive the screws through the flange. The flange should be secured tightly to the door edge while making sure that the flaps align correctly. Once the movable panels are in place apply silicone-based lubricant onto the top track arm connector blocks, the lead Bogie wheels and the slave Bogie wheels and then replace the cap on the hole made of plastic.
Repeat the process for each of the other two movable panels to restore their slide functionality. Reinstall the plastic flanges. Finally, attach the jamb side strip to the counterpart fixed panel using a plastic adhesive. After repair patio door lock has dried then reattach the handle and test for smooth operation. If there are any issues, adjust the lead Bogie wheel again by taking it out of its channel, cleaning it and then reinstalling it using a bit of silicone-based grease.
Charley Bar Installation
A patio door is a convenient means to let your pets inside and out of your home, but it could also be an easy access point for burglars. Add a pin lock to your patio door, or a charley-bar for extra security. These devices offer a combination of security and convenience that is unrivaled by any other product on the market.
The bar charley is a fantastic option for sliding glass door and is easy to install at your home. The charley bar is installed in the middle of your door and stops the patio door from being jimmied open with tools or other items, like a hockey stick or broom handle. The charley bar is constructed of injection-molded polycarbonate, and extruded RPVC telescoping tubes, making it strong and durable.
To install the charley bars, first make sure that it's the right length for your door by measuring horizontally from the edge of the sliding door track to the sliding glass patio door. Then, you can mark the points where the charley bar will be installed using pencil. Utilize a drill bit that is 8 inches to drill holes into the wall jamb and patio door frame be careful not to scratch the patio door glass. Then, tighten the screws that came with the charley bars.
The charley bar is an excellent choice for your sliding glass patio doors as well as windows made of sash. This simple security gadget will keep your patio sliding doors tamper-proof and burglar-proof for a long time to come. It is constructed of injection-molded polycarbonate and has been tested to withstand over 400 pounds of pressure by Intertek. In addition the charley bar is able to be locked by using the key that comes with it. It is easy-to-install and hangs out of the way when it's not being used. Most hardware stores sell a charley bar. If you want a charley-bar that works, purchase it from an online retailer.